meCheat Tweaks Custom Tweaks for Samsung Galaxy Y
Here is a new custom tweak for your Samsung Galaxy Y, made by “DroidFolks”. meCheats is packed with a lot of tweaks which can improve your overall battery, touch, network, ram performance.
Features
Like I said above, lots of touch, battery and performance tweaks.
Downloads
Download the meCheat Custom Tweaks from (here). The password for downloading the file is “mecheatdf” (Without Quotes).
How to?
Flash it normally with CMW. Be sure to have a Backup with CMW.
High Velocity Tweaks for Samsung Galaxy Y
High velocity is one of the best and well known Custom Tweak for Samsung Galaxy Y, which is just made to increase the performance by modifying the Low Memory Killer (LMK). High Velocity is also packed with SD Read/Write tweaks and with tons of build prop tweaks. Thanks to dev “Ne.xt” @ xda-developers.
So, what’s inside v4? According to the changelog made by the dev, CONTENT_PROVIDER (LMK) : Increased value from 46mb – 52mb
EMPTY_APP (LMK): Increased value from 56mb – 62mb.
Downloads
Download High Velocity custom tweak from xda (here).
How to?
- Download zip
- Reboot to recovery mode
- Mount system
- Flash zip
- Reboot system
VulpiX Tweaks for Samsung Galaxy Y
Vulpix is a new fully powered custom tweak made by “Nitzz” from xda, packed with a lot of system core tweaks to get best performance + battery and audio tweaks for much better battery life and audio clarity for your Samsung Galaxy Y. Check out the complete features below. Please be sure to take a full backup with CMW before flashing.
Features
– Greatly increases the score AnTuTu
– Radically improved management of ram(Using Hard Multitasking Tweak)
– Improves a lot the graphics (found a new way to integrate bravia engine parts in mod)
– Scan multimedia time drastically reduced
– Network Improvements
– All SQlite database optimized
– Android performances improved
– Enable hardware features turned off by default for a better experience on entry level devices
– Cleans the system every 24 hours, thecache every week and the Dalvik every month
– Reduces the startup time of Android
– Allows you to play ported games without lags
– Automatically Zipalign on each boot
– New Beats Audio 2.0
– New Enhanced LOOPY SMOOTHNESS tweak
– V6 supercharger parts included
– Launcher loading is much faster than before
– Boot time decreased- The battery is calibrated on every boot
– Drastically decreased the drainage of battery
– Check the activities that consume too much battery stop them
– When the phone is charging reduces system services for faster charging
– Improvements in build.prop
– Disable animation of the system when the battery is nearly exhausted
Downloads
Get Vulpix V1.0 from Mediafire (here)
How to?
- Reboot to recovery
- Open CWM
- Wipe data and Cache
- Install
- Reboot
- Enjoy
Your first boot should take a while (sometimes the second one too..). Its normal and don’t worry about it.
Fly-On Mod V3 for All Android
Fly-On is for someone who doesn’t like their phone coz of laggy performance and other stuffs related to it. This tiny package can be used on any android phone with init.d supported kernel (to know how to enable init.d support on your Samsung Galaxy Y running on stock kernel visit here), a rooted phone and also the device should be GB or greater.
Features
- Full memory management with 5 different configs.
- Zipalign apps in “/system” at every boot, and apps in “/data” every 48 hours.
- CPU governors tweaks and improvements for better performance and battery life.
- Increased SD Card read-ahead cache to 2048 KB to improve SDCard write/read speed.
- Nos entropy seeder generator engine used to reduce lags.
- Ad blocking.
- Battery life improvements.
- SQLite and database optimizing every 48 hours.
- Network TCP tweaks.
- Kernel, VM and sysctl tweaks and improvements.
- File system speedup.
- Build.prop tweaks and improvements.
- Cleans log files and tombstones at every boot.
- Many other tweaks for better performance and battery life
Downloads
Download Fly-On for Stock based roms (here). Download Fly-On for CM (here).
How to?
- Download the zip file.
- Copy to your sd-card.
- Flash it with CMW.
- Done.
Pure Audio Engine Custom Tweak for Samsung Galaxy Y
This is one of the best audio tweak I have got for Samsung Galaxy Y. Great thanks to dev “Jeeko“. Sure to try it out.
Features
– Clear sound
– No more track noise
– Beats™ Audio by Dr.Dre
– Audio Pure™ Control not to damage your hearing
– Also compatible with the headphones that don’t support audio render of 60kHz
– Where possible, arrange for the conversion of the songs (in background) below 256 kbps to 320kbps
– During playback of songs / sounds make a soft frequency scaling to reduce noise and highlight the track
– It offers more powerful and closed bass
– Efficient even with stock headphones
– Improves a lot the audio call
– Enhance the speakers for playing music without headphones in high quality
Download
Download this tweak from Mediafire : Download
A Demonstration from Dev
Here’s proof with the app Noise Meter
(More decibels = worst quality
Less decibels = higher sensitivity and better sound
Before PureAudio Engine
Compatibility
This Audio Engine works on GB/ICS/JB/CM9/10.x/AOSP ICS and I hope even KLP (in future), it doesn’t work on any CM7.x.
Tips of avoid conflits
It would be preferable to remove Beats™ or xLoud, but if you don’t succeed …. no problem!
The important thing is you remove DSP Manager
How to?
– Download the Audio Engine, cpoy to sd-card.
– Flash it via CWM
– Reboot
LynxAudio Custom Tweak for Samsung Galaxy Y
This one is a new audio tweak made by “androite” from xda-developers. As he says, LynxAudio = Beats + Alsa. Try it out.
Features
-New and powerful audio libraries
-NOT BLOATED WITH USELESS FILTERS AND FILES
-ALSA which AUTO CONFIGS settings for your audio chip
-100% overall audio improvement
-Re-Enabled AudioPreProcessing features (Automatic Gain Control, Noise Suppressor and Acoustic Echo Cancelling)
-Ultra Clear High Frequency treble
-Crystal Clear vocals and background vocals
-Alive, beating drums
-Qualcomm Audio mode set to FluencePRO
-Enabled Qualcomm Surround-Sound recording
-Less Audio clipping
-Less Distortions
-More Dynamic Range
Download
Download from the original link : Download
How to?
- Boot to recovery mode
- Use CWM
- Select – Install from sdcard
- Select the zip file
- Select Yes
How to Enable Init.d Support On Stock Kernel for Samsung Galaxy Y
This is a tut for how to enabling Init.d support on stock kernel on Samsung Galaxy Y.
Whats Init.d?
Init.d has a special place in Android. With it, users can install scripts and mods to run at boot, and thus modify almost any aspect of the phone that they want. There are battery tweaks, performance tweaks, GPS tweaks, signal tweaks, and the list goes on and on. However for these scripts to work, the phone must first have init.d support. Typically, Ramdisks provide init.d support, but sometimes it is possible to gain init.d support without flashing a new Ramdisk, or even without altering the Ramdisk at all. – joe-hindy, xda-developers.
How to check whether you have Init.d support?
- Download and extract this file. (Download Here)
- With any file explorers, copy the 00test to “/etc/init.d”. Make a folder if you didn’t find any “init.d” folder.
- Change the permission of init.d folder and 00test file to “rwxrwxrwx”.
- Reboot.
- After that, if you see a file named “test.log” in “/data”, that means you have init.d support. If no, then continue.
Requirements
- A rooted phone.
- Busybox.
How to?
- Download this app (Download)
- Install and open up.
- Just follow the procedure.
- Done!
High-Velocity V1.1 Custom Tweak for Samsung Galaxy Y
This one is a new tweak packed with a lot of stuffs inside. This one is made by “Ne.xt” form xda-developers.
Features
– Velocity LMK Tweaks | Advanced Android Memory Management designed for Samsung Galaxy Y
– SD Card R/W Speed Boost Tweaks | Faster SD Card Read & Write
– VM Tweaks | Virtual Machine Tweaks to reduce lag and save more power
– Network Speed Tweaks | Better WiFi Speeds, Browse the internet faster
– Build.prop Tweaks | Graphic, Battery, and Performance tweaks through Build.prop
– SQLite Optimizer | “World first smart sqlite optimizing” – ImbaWind
– Zipalign | “World first smart zipaligning” – ImbaWind
Download
You can download the file from Mediafire : Download
Things You Need
Make sure you have all these before flashing.
- A kernel with init.d support
- Gingerbread 2.3, Stock or Custom
- At least 2mb free space in your system partition
- At least 1-5mb free space in your data partition
- Clockworkmod 5.x +
How to?
- Boot to recovery mode
- Use CWM
- Select – Install from sdcard
- Select the zip file
- Select Yes
Boot Animation Enabler for Samsung Galaxy Y
If you are running stock rom and you really need to a custom boot animation on your phone, then this tiny tool is made for you. Thanks to the developer “deathnotice01” from xda-developers.
Download
You can download the file from Here or Here
How to?
- Boot to recovery mode
- Use CWM
- Select – Install from sdcard
- Select the zip file
- Select Yes
Fly-On Mod Custom Tweak for Samsung Galaxy Y
Made by “slaid480” from xda-developers.
Features
-Min-Free and LowMemoryKiller enabled.
-Zip-aligning apps while Booting.
-Turbo Charged,Makes Your launcher very smooth!!
-system tweaks.
-Improved SD Card speed write/read!
-Battery Life improvements.
-Better Multitasking.
-Sqlite and Database Tweaks.
-Network TCP tweaks.
-sysctl tweaks.
-Kernel and VM tweaks and improvements.
-file system speedup.
-Ext4 tweaks.
-Many other tweaks for better performance and battery life!
Requirements
-Android Gingerbread 2.3.x
-Root
-Kernel that supports init.d
-ClockWorkMod(4 or higher)
-At Least 1MB of space free in /system
Downloads
You can download the mod from Mediafire:
My Galaxy Young 